Carbon Fibre Supplier · India
Carbon Fibre Supplier in India | Composite Solutions by Shanti Multilink
Shanti Multilink supplies carbon fibre tow across India for composite manufacturing, sports equipment, engineering, and defence applications, helping manufacturers get the strength-to-weight performance carbon fibre is known for.
The Basics
What Is Carbon Fibre?
Carbon fibre is a material made from thin strands of carbon atoms, bonded together in a way that gives it high strength for very little weight. Individual filaments are spun into a continuous tow, then used on their own or woven into fabric, depending on how the material will be processed further.
What makes carbon fibre useful across so many industries is this strength-to-weight balance. As a carbon fibre supplier in India, we see it specified wherever manufacturers need a reinforcement material that adds stiffness and strength without adding significant weight sports equipment, engineering components, and composite parts across various industries all draw on the same basic property.
Carbon Fibre Solutions
Our Carbon Fibre Solutions
We supply carbon fibre material suited to different composite, engineering, and industrial manufacturing needs across India.
01
Carbon Fibre Material
Used across advanced manufacturing applications where a lightweight, high-strength reinforcement is needed within a composite structure.
02
Carbon Fibre Fabric
Used in composite manufacturing for reinforcement and structural applications, supporting improved product performance where woven fabric suits the process better than raw tow.
03
Carbon Fibre Sheets
Suited to industrial and engineering applications needing a lightweight structural solution, particularly where flat, pre-formed material is easier to integrate.
04
Carbon Fibre Composite Solutions
Applied in advanced composite production where finish quality and efficient processing both matter, from prototyping through to production runs.
Our Products
Carbon Fibre Tow
We supply carbon fibre tow in a range of standard sizes, suited to sports, engineering, defence, and general composite manufacturing use. Continuous carbon fibre tow supplied on spools, available across a range of standard tow sizes for different reinforcement requirements. As a carbon fibre supplier, we stock this material for sports equipment, engineering components, and defence-related composite applications.
Category
Reinforcement Fibres
Applications
Sports, Engineering, Defence, etc.
Form
Fibre / Tow
Available Grades / Specifications
Tow sizes: 1.5K, 3K, 6K, 12K, 24K, 48K; Tensile strength: 4000 MPa or more
Storage / Handling
Standard — store spools in a dry area, away from contamination.
As a carbon fibre supplier serving customers across India, we can help you match the right tow size to your composite or reinforcement requirement. Full specification details are available on request.
Why It’s Used
Benefits of Using Carbon Fibre
Applications
Where Can Carbon Fibre Be Used?
Carbon fibre is used across a range of composite and industrial manufacturing settings in India.
Epoxy Resin
Epoxy resins have wide application range like Civil Construction,Electrical and Electronics, Composite,
LAPOX Epoxy Systems - By Chemical Category
- Bisphenol A Based Epoxy Resins
- Curing Agents – Phenalkamines
- Bisphenol F Based Epoxy Resins
- Curing Agents – Aromatic Amines : Modified
- Multifunctional Epoxy Resins
- Curing Agents – Aromatic Amines : Unmodified
- Cycloaliphatic Epoxy Resins
- Curing Agents – Linear Aliphatic Amines & Adducts
- Brominated Epoxy Resins
- Curing Agents – Cycloaliphatic Amines, their Adducts & Polyaminoamides
- Reactive Diluents
- Curing Agents – Formulated Anhydrides
LAPOX Epoxy Systems - By Application
How It Works
Our Carbon Fibre Selection Process
Choosing the right tow size and grade has a direct effect on how a composite part performs, which is why we treat selection as a proper step rather than a quick pick.
-
Application Requirement Assessment
We look at your product requirement, manufacturing process, and performance expectations before suggesting a material.
-
Material Selection
Based on that assessment, we help select a suitable carbon fibre material for your application.
-
Processing & Application
We share guidance on proper handling and integration of the carbon fibre with your composite system.
-
Production Testing
Initial parts are checked for material quality, product compatibility, and performance requirements.
-
Continuous Improvement
Material selection can be adjusted over time as your manufacturing requirements or product specifications change.
Selection Guide
Choosing the Right Carbon Fibre Solution
There’s no single carbon fibre grade that suits every job. The right choice usually depends on a few practical factors.
Application type
Sports equipment, engineering parts, and defence applications each call for different tow sizes.
Required strength
Higher-load applications may need a heavier tow or a specific tensile strength grade.
Manufacturing process
Filament winding, layup, and pultrusion processes create distinct performance demands and requirements for fibres.
Composite compatibility
The carbon fibre needs to work well with your chosen resin system.
Product design requirements
Complex geometries may need a different tow size or fabric format than flat parts.
Industrial environment
Material performance depends on storage and handling
Matching these factors to the right carbon fibre material helps achieve better production consistency and supports more predictable results across your manufacturing runs.
Why Shanti Multilink
Why Choose Shanti Multilink for Carbon Fibre Solutions?
- We start by understanding what you're manufacturing the product, the process, and the performance requirement before recommending a carbon fibre material, rather than offering the same tow size for every order.
- As a carbon fibre supplier, our focus is on helping you select a suitable tow size and specification, and offering guidance on handling so the material performs as expected in your layup or process.
- We pay attention to product quality and are happy to adjust our recommendations as your manufacturing requirements change, whether that's a new product line or a shift in production volume.
- We serve industrial requirements across Ahmedabad, Gujarat, and Rajasthan, and supply carbon fibre to customers across India, with clear communication from initial enquiry through to product supply.
FAQs
Frequently Asked Questions
Carbon fibre is used as a reinforcement material in composite manufacturing, prized for its high strength relative to its light weight across sports, engineering, and defence applications.
Carbon fibre adds structural strength and stiffness to a composite part without adding much weight, which is why it’s chosen over other materials in performance-focused applications.
Yes, though the right tow size matters. Lighter tow suits some applications, while heavier tow is better suited to more demanding structural requirements.
It depends on your product’s strength requirement, manufacturing process, and how the fibre needs to interact with your resin system. Sharing these details helps us recommend a suitable tow size.
Tow size, storage conditions, handling during layup, and resin compatibility all play a role in how well carbon fibre performs in the finished part.
Yes. Carbon fibre is widely used in FRP and other composite manufacturing where a lightweight, high-strength reinforcement is needed.
Contact us with details about your product, process, and required strength. As a carbon fibre supplier in India, we can suggest a suitable tow size and share further specification details.
Get the Right Carbon Fibre Solution for Your Manufacturing Needs
Share your product requirement, process, and preferred tow size, and we’ll help you work out a suitable carbon fibre solution, along with product details and a quotation.